How to Remove and Clean Ovvo Metal Glasses Lenses Safely: A Step-by-Step Guide

Removing and cleaning the lenses from your Ovvo metal frames can seem like a daunting task, especially when dirt and grime accumulate in hard-to-reach areas. This comprehensive guide will walk you through the process, ensuring you can maintain the optimal health and appearance of your glasses without damaging them.

Checking the Frame Design

Before you begin, it's important to check the design of your Ovvo frames to ensure they are indeed designed for lens removal. Some frames, especially Ovvo metal frames, have unique hinge mechanisms and specific fit that make them difficult to dismantle. Proceeding with caution and using the appropriate tools will help ensure a successful cleaning process.

Gathering the Necessary Tools

Preparing the right tools is crucial for the job. Here's what you'll need:

A small screwdriver (Phillips or flathead) A microfiber cloth A lens cleaner A soft brush (if needed) A 6-inch squeeze-type bar clamp (if needed) A sharp pencil that has had its lead removed

Step-by-Step Process of Removing and Cleaning the Lenses

Unscrewing Hinge Screws

If your frames have screws at the hinges, carefully unscrew them using the appropriate screwdriver. This step is crucial as it will make it easier to access the lenses.

Gently Wiggling the Lenses

Nobody wants to force lenses out, as this can lead to damage. But if the lenses are held in place by a groove, gently wiggle them out. Be cautious not to apply too much pressure, as this can break the lenses or the frame.

Alternative for Screwless Frames

For screwless frames, you can remove the lenses by opening the hinge and releasing the temple pieces. The tension around the lens will relax, allowing for easy removal.

Cleaning the Frames

Once the lenses are removed, use a soft brush or microfiber cloth to clean the dirt out of the ridge and other hard-to-reach areas. This will ensure your frames are not only clean but also in optimal condition.

Reinserting the Lenses

After cleaning, carefully reinsert the lenses and reattach any screws, ensuring everything is secure. This final step will restore your glasses to their original fit and appearance.

Professional Help is an Option

If you're unsure about the process or feel uncomfortable handling your glasses, it's always a good idea to take them to an optician or eyewear professional. They have the tools and experience to clean your frames without risking damage.

A Personal Experience: Fixing Damaged Ovvo Glasses

One user shared a personal experience of fixing their Ovvo glasses after they were stepped on and one of the lenses popped out. This user achieved success using only two tools: a small 6-inch squeeze-type bar clamp and a pencil with the lead removed.

The steps they followed:

Placed the lens into the frame, making sure the groove on the top of the lens sat into the frame. Prepared the frame by placing it into the clamp with clamping pressure sideways from the nose piece to the temple piece. Applied pressure using the clamp. Used a sharp pencil (with the lead removed) to hook the bottom wire of the Ovvo frames, guiding it into the groove. With gentle pressure and careful maneuvering, the wire was guided around the lens until it popped into the channel in the lens. Hydrated the bent metal frames with time and gentle twisting until they were back into the desired shape.

The user emphasized the importance of not giving up, as perseverance and patience are key to successful repairs.

In conclusion, with the right care and tools, you can effectively remove, clean, and repair your Ovvo metal frames. If you're unsure or uncomfortable, professional help is always an option. Happy cleaning and good luck with your repair!